Arduino Joysticks # 01



In my 1st tutorial I taught you about joysticks and how it is working and I promised to go further about joysticks. As it is in this post you can understand how to use this joystick with arduino in practically.

To build up this project. you need the following parts.

1. Arduino Uno
2. Joysticks
3. LEDs
4. 220ohm Resisters
5. Jumper wires
6. Project board



Remember that the Atmega328 should be uploaded the Bootloader.

Then understand carefully the systematic of wiring as shown below.


Then CONNECT ARDUINO with your PC and upload the following code.

usb 3.0

REMEMBER TO NOTE : IF YOUR PC HAS USB 3.0 PORT DOT NOT CONNECT ARDUINO TO THAT PORT. PLEASE MAKE SURE YOU HAVE CONNECTED ARDUINO WITH USB 2.0 PORT








COPY AND UPLOAD FOLLOWING CODE


CHECK THIS VIDEO

0 comments:

-->
Copyright © 2013 Easy Mades